KDCSOL 100E series is Oil-filled closed overhang rewindable motor with Enamelled insulated copper wire. The motor is built using a Permanent magnet rotor, ball bearings and a mechanical seal. The filled oil not only lubricates the bearings but also cools the windings and transfers heat from inside to outside of the motor. The mechanical seal perfectly seals the motor from water entry.(Motor rating – up to 7.5 HP). Main Applications – Solar-powered pump system, Domestic water supply, Groundwater management, General irrigation systems, Spray irrigation systems, Fountains.
KDCSOL 100-WF series is a water filled closed overhang rewindable motor with wrapped polymer insulated winding wire. The water fill not only cools the motor winding, but also lubricates the bearings. The water tight internal connections are led out through the sealing glands. The motor consists of permanent magnet rotor. (Motor rating – up to 5 HP). Main Applications – Solar-powered pump system, Domestic water supply, Groundwater management, General irrigation systems, Spray irrigation systems, Fountains.
KDCSOL 150-WF series a water filled closed overhang rewindable motor and consists of a rewindable wrapped polymer insulated winding wire and magnetic rotor with tilting pad thrust bearing arrangement, All the components such as bearing body upper lower & thrust bearing housing are made up of stainless-steel castings. (Motor rating – 7.5 HP to 15 HP)/ Main Applications – Solar-powered pump system, Domestic water supply, Groundwater management, General irrigation systems, Spray irrigation systems, Fountains.
UMAISOL 100CH series is a water filled closed overhang rewindable motor with wrapped polymer insulated winding wire. Other components are of stainless steel/SG iron with SS Cladding. (Motor rating – up to 5 HP). Main Applications – Solar-powered pump system, Domestic water supply, Groundwater management, General irrigation systems, Spray irrigation systems, Fountains.
UMAISOL 150CH series a water filled closed overhang rewindable motor and consists of a rewindable wrapped polymer insulated winding wire and copper rotor with tilting pad thrust bearing arrangement, All the components such as bearing body upper lower & thrust bearing housing are made up of stainless-steel castings / SG Iron with SS Cladding. (Motor rating – 7.5 HP 10 HP). Main Applications – Solar-powered pump system, Domestic water supply, Groundwater management, General irrigation systems, Spray irrigation systems, Fountains.
The solar pump controller is a variable speed motor drive designed to run AC/DC/PMSM motor. The controller starts the pump slowly and adjust its speed according to pumping load and power available from solar array. Power output from the solar array is optimally matched to the load by Maximum Power Point tracking (MPPT) mechanism throughout all conditions. The controllers are having dry run, over load, open circuit and short circuit protections available. The controllers are available in IP54 & IP65 variants. Main Applications – Solar-powered pump system, Domestic water supply, Groundwater management, General irrigation systems, Spray irrigation systems, Fountains.
Multistage centrifugal pump in ring-section design, made of stainless steel. For well diameters of 100 mm (4 inches) and above. Available with single-phase AC motor, three-phase motor or DC motor with motor lead.
CORACHROM - A complete Stainless Steel Submersible pump series in multi-stage construction with radial and mixed flow in 100 mm (4") & 150 mm (6") is built in India with German technology.
Single stage, monobloc, pump in compact and light weight design. Suitable for solar application. Available in 2 to 20 HP. Main Applications - Solar-powered pump system, Domestic water supply, General irrigation systems, Spray irrigation systems.
Single Stage & Three phase openwell Submersible pumps. Applications - agriculture, drinking water supply, fountains, buildings, farm houses etc. Available in both Aluminium and Copper rotor. Motor rating – upto 30HP.
Single Stage, Single phase & Three phase centrifugal surface monobloc pumps. Applications - agriculture, drinking water supply, fountains, buildings, farm houses etc. Motor rating – upto 20HP.
CONTI - 3 core PVC insulated flat cables with superior quality and assured long life. Every cable is precisely manufactured with exceptional process control. The conductor is made of multiple strands of finely drawn copper wires having purity of minimum 99.9%. The cables are available from 1 sq.mm to 50 sq.mm and ISI 694 marked.
Submersible pump in multi-stage construction with radial or mixed flow impellers coupled with oil and water filled, single phase submersible motors. Pumps with SS jacket are also available from 75mm and 100 mm diameter. Suitable for horticulture, irrigation, housing, building services and farm houses, ornamental fountains etc.
Single Stage & Single phase openwell Submersible pumps. Applications - agriculture, drinking water supply, fountains, buildings, farm houses etc. Available in both Aluminium and Copper rotor. Motor rating – upto 5HP.
Single Phase Motors are used in variety of applications in households and small industrial sectors, we have single phase motors in various output powers, constructions and enclosures in the applications of Milling Machine, Compressor, Grinder Mixer of Food Industry, Chaff Cutter, Crusher, Sugarcane Juicer, Dal-Mill & Small Construction Equipment's ,we have Cast Iron & Sheet Metal MOC Squirrel Cage Capacitor Start & Run Single Phase Induction Motor of 1 HP,2 HP, 3 HP and 5 HP.
Three phase direct on line starter for non reversing control of all types of induction motor.
Horizontal self priming volute casing pumps, single stage with semi open impeller, in back pull out design. Long coupled on baseplate, suction lift up to 7 metres. Suitable pump for pumping muddy water, sewage, polluted liquids including solids etc. and applications where priming & foot valve is to be avoided.
Horizontal self priming volute casing pumps, single stage with semi open impeller, in back pull out design. Monobloc, mono shaft design, hydraulics are assembled on extended motor shaft, suction lift up to 7 metres.
Self priming mini monobloc pump of AQUA series are compact in design, available in Aluminium die cast, Aluminium extruded & C.I body and can withstand wide voltage range, with suction lift up to 8m. These are fitted with T.O.P. Applications - for pumping water to overhead tanks in bungalows, fountains, farmhouses etc.
Self priming mini monobloc pump are compact in design and can withstand wide voltage range, with suction lift up to 8m. These are fitted with T.O.P. Applications - For pumping water to overhead tanks in bungalows, fountains, farmhouses etc.
Centrifugal pumps in monobloc construction. Self priming up to 6 m. Robust and sturdy design. Capacitor start and run type design eliminates centrifugal switch. Applications - Suitable for pumping of water to overhead tanks, in bungalows, fountains, car washing, lawn sprinklers etc.
Single stage, monobloc pumps in compact and light weight design. These pumps are available in single phase power supply. Dynamically balanced rotating parts ensures minimal vibrations. Suitable for agriculture, industries, gardens, fountains etc.
Centrifugal pumps in monobloc construction. Self priming up to 8 m. Capacitor start and run induction run single phase motor for high torque. Applications - for car washing, booster application, water circulation in solar heating systems etc.
These self priming centrifugal pumps are designed for application in open and shallow wells, sumps to deliver large volume of water. These pumps find wide applications in residential bunglows, hotels, small farms, lawns etc.
Centrifugal pumps in monobloc construction. Self priming up to 8 m. Robust and sturdy design. Capacitor start and run type design eliminates centrifugal switch. Pressure die cast rotor with TEFC enclosure for motors. Suitable for pumping of water to overhead tanks, in bungalows, fountains, car washing, lawn sprinklers etc.
Single stage monobloc pumps in compact design. Stainless Steel casing with Brass impellers and Stainless Steel shaft, Aluminium die cast motor body. Pumps can be used for booster applications, residential flats etc.
Horizontal, centrifugal, radially split, multistage pumps fitted with pressure tank, pressure sensor and gauge.
The automatic pressure pump is designed to automatically start & stop on opening and closing of taps and maintain water pressure. Fitted with two litre hydro pneumatic tank with pressure switch. Y type brass strainer its supplied with pump to avoid entry of dirt particles thus improving pump life. Applications – for residential pressure booting applications like faucets, showers etc
Open-well submersible pumpsets in monobloc construction comes with unique features like prefilled motor and 10MTR connection cable. These operate in wide voltage range and have SS jacketed motor with NORYL impellers. Suitable for pumping of water to overhead tanks, flood irrigation, de-watering of storm water etc.
Single Phase, vertical, openwell multistage pump. Made up of SS Jacket with NORYL internals. Suitable for pumping water to high head.
Submersible pump in multi-stage construction with radial or mixed flow impellers coupled with oil and water filled, single phase submersible motors. Pumps with SS jacket are also available from 75mm and 100 mm diameter. Suitable for horticulture, irrigation, housing, building services and farm houses, ornamental fountains etc.
The SS Motor Body Sewage Submersible Pump, designed to handle wastewater and sewage, operates on a single phase. It exhibits durability and corrosion resistance, rendering it suitable for submerged operations. These models come with ratings of 1.0 HP and 2.0 HP, designed for single-phase power supply, This pump finds application in various settings such as construction sites, hotels, restaurants, and sewage treatment plants. Additionally, it is capable of managing solid waste up to a particle size of 20 mm, attributed to its impeller made from IS 210 GR FG200 material.
Vertical, monobloc pumpset, free flow impeller of two sizes, 1Ø and 3Ø motors with IP 68 protection, 1Ø motor with built-in thermal overload protection and float switch, bi-directional mechanical seal. Suitable for pumping surface water, rain water, waste water containing solids, drainage of sumps liable to flood, agricultural pits and canals.
Ama-Drainer 300 series Vertical fully floodable submersible motor with In built swing check valve. Jacket cooled single phase motor with integrated temperature switch. Float switch for automatic operation. Suitable for lowering surface water level, transfer of water, agricultural pits, & sprinklers in gardens, drainage of cellars / basin.
Single stage, submersible, centrifugal pumps of closed coupled (monobloc) construction. Amarex IN pumps are suitable for handling waste water transport, storm water transport, waste water treatment etc.
KRTU pumps are suitable for handling municipal and industrial waste water. 3 types of impellers available to suit a variety of needs.
Reliable control panels for single phase pumpsets. Control panels are designed for wide voltage operating range.
Pressure control manager for pressurized water showers in bathrooms.